Manualer & guides
Her finder du manualer, vejledninger og praktiske guides til dit iWater-produkt. Få hjælp til opsætning, daglig brug, rengøring, vedligeholdelse og fejlfinding.
Brug for yderligere hjælp?
1. Fyld vandbeholderen. 2. Tryk på knappen i 3 sekunder. 3. Vent 3 minutter.
Flashing red light
Indicates low battery. Charge the bottle with the charger.
Solid red light
Indicates that the bottle is charging. Changes to green when fully charged.
Error: No bubbles
If you experience that no bubbles are produced when starting the hydrogen bottle (All-Day+ or Pocket), it is most likely because the electrolysis plates at the bottom of the bottle have dried out.
How to fix it:
- Open your bottle and fill it halfway with water.
- Screw the lid on.
- Leave the bottle turned off with water in it for 3 hours.
- Pour out the water.
- Fill the bottle with water and screw the lid on.
- Press the button to start.
- The bottle should now produce hydrogen bubbles again.
TIP: When drinking from the bottle, always leave a small mouthful of water behind in the bottle so the electrolysis plates do not dry out when you are not using it. If the above does not work, you must use our instructions to clean the bottle by descaling it. You will find descaling instructions under support. If you experience that the bottle still does not make bubbles after leaving it with water for a few hours and descaling it, please contact iWater at support@iwater.dk
To extend the lifespan of the hydrogen bottle, it is important to run the bottle's cleaning program 1-2 times a month. Here is how you do it:
- Fill the bottle halfway with water.
- Screw the lid on.
- All-day+ hydrogen bottle: Press and hold the button for 5 seconds to activate cleaning.
Pocket hydrogen bottle: Press the button 3 times in succession. - The bottle glows red for 3-5 minutes.
- Unscrew the lid and pour the water out.
- Rinse the bottle before using it again.
Aktivér selvrensning af All-Day+ hydrogenflasken:
Descaling
To extend the lifespan of your hydrogen bottle, it is important to descale it 1-2 times a month.
Vi anbefaler, at flasken afkalkes med sulfamidsyre fordi det er effektivt og samtidig skånsom mod elektrolysepladerne. Derudover efterlader sulfamidsyre ingen lugt eller smag. Du kan købe sulfamidsyre her: Afkalkningspulver
How to descale your hydrogen bottle:
- Fill the bottle halfway with 70°C hot water.
- Pour in half a bag of descaling powder.
- Screw the lid on.
- Wait 3 minutes.
- Shake the bottle and unscrew the lid.
- Pour out the contents and rinse twice with clean water.
- The bottle is now ready to use.
Sådan afkalker du All-Day+ Hydrogenflasken:
The bottom part of the hydrogen bottle (where the button is located) and the lid must NEVER be put in the dishwasher. You may unscrew the bottom part and the lid and place the glass in the dishwasher.
- Skru bunden af flasken
- Kom vand i inhalationskoppen
- Skru inhalationskoppen på bunden
- Monter inhalationsslage
- Hold start-knappen inde i 5 sekunder til den begynder at lyse violet. Så laver den hydrogen til inhalation i ½ time.
- Flasken kan godt oplade mens man inhalerer hydrogen
0 resultater
Ingen resultater matcher din søgning
Brug for yderligere hjælp?
Spørgsmål og svar om Pocket hydrogen bottle
Vi anbefaler at skifte filteret hver 6. måned ved normalt brug.
Use per charge:
- All-Day+ hydrogen bottle: approx. 8 x 10 min. / 16 x 5 min.
- Pocket hydrogen bottle: approx. 15 x 5 min.
Charging takes 3 hours with USB-C.
Some have experienced issues charging their hydrogen bottles using a cable normally used for an iPhone or other Apple products. So if you are having trouble charging your hydrogen bottle, try using a different charger/cable.
No. You may only put clean drinking water in the bottle. Everything else (juice, tea, carbonated drinks, oil drops, etc.) clogs the membrane, which will severely reduce the lifespan of the product. If you use anything other than clean water in the bottle, the warranty will be voided.
You may use filtered water (from e.g. Mosel Filter Pitcher or Cone Filter) in your hydrogen bottle.
Just as in other products, rechargeable batteries will lose some of their efficiency over time. This is also the case with hydrogen bottles.
With daily use, you will experience that the hydrogen bottle needs to be charged more frequently after 1–2 years of use. This is completely normal.
If you find that the bottle cannot be used unless the charging cable is plugged in, please contact support@iwater.dk. You should also contact support if you believe the battery's efficiency has dropped more than expected given how long ago you purchased the hydrogen bottle.
Use the form at the bottom of this page, or write to support@iwater.dk. We usually respond within 1 business day.
Yes. You have a 14-day right of withdrawal from the day you receive the item. The item must be returned in substantially the same condition.
There is a 2-year warranty period on all iWater products. Wear and tear parts such as filters are not covered.
0 resultater
Ingen resultater matcher din søgning
Har du brug for mere hjælp?
Vores support står klar til at hjælpe dig. Udfyld formularen, så vender vi tilbage hurtigst muligt.
